Radon Mitigation & Testing
NRPP-AARST Certificate 108119/108167
[email protected]

Types of Radon Mitigation Systems in Idaho Falls and How They Work

Home » Blog » Types of Radon Mitigation Systems in Idaho Falls and How They Work

types of radon mitigation system installation in idaho falls

Radon is a Class A carcinogen that puts you and your loved ones at risk of lung cancer if left to accumulate in your indoor air environment. If you have tested your property and found elevated levels of radon, it is critical to commence radon mitigation right away. 

In Idaho Falls, property owners have access to several radon mitigation systems. However, it’s essential to understand that your property’s foundational design significantly influences the type of radon mitigation system you’ll install.

Homes With Basements or Slab-on-Grade Foundation

For homes with a basement or slab-on-grade foundation, any of the following radon mitigation systems can help to reduce radon levels.

1. Active Sub-Slab Suction

This is the most effective and highly preferred radon reduction method for many property owners in Idaho Falls. To begin, the first step is installing one or more suction pipes through the floor slab to pull air into the crushed rock or underneath the soil and capture it before it enters the building. Next, a vent fan connected to the suction pipe draws the radon up for safe redistribution outdoors.

2. Passive Sub-Slab Suction

This system is relatively similar to the active sub-slab suction system; however, the only difference is that it depends on natural pressure differentials and air currents instead of a fan to draw the radon from beneath the slab and into the outdoor environment.

3. Sump Pump Suction

In addition to, or moreover, adding a radon suction pipe to the sump pump in the basement and capping it not only drains unwanted water away from the property but also reduces the levels of radon.

4. Block Wall Suction

This is the most preferred system for basement homes with hollow block foundation walls. Firstly, a sub-slab suction is inserted into the hollow walls to draw air, which, in turn, increases pressure on the wall and ground, effectively trapping radon gas.

Homes With Crawl Spaces

These are the most preferred radon mitigation systems for homes with crawl spaces in Idaho Falls.

1. Crawl Space Encapsulation

This method involves air-sealing the crawl space with a high-density sheet to guarantee quality and effectiveness. Additionally, a perforated pipe is installed under the sheet and connected to a suction fan that draws moisture and radon away from the property.

2. Crawl Space Ventilation

Ventilating a crawl space actively, on the other hand, or passively reduces the suction in the soil and dilutes the radon concentration beneath the property. Active ventilation refers to the use of a fan to blow air into the crawl space instead of relying on natural circulation. In contrast, passive ventilation is achieved through opening venting units to allow air circulation.

Get a Quality Radon Mitigation System in Idaho Falls With Teton Radon Services

For a quality radon mitigation system that will provide effective results, look no further than Teton Radon Services. We offer unrivaled radon mitigation services for homes and businesses in Idaho Falls. This process involves installing the right mitigation system based on the property design and remodeling the property’s interiors and exteriors to ensure it blends in perfectly. Contact us today to schedule a free consultation.

Call Now Button